Moje Auto Radiator sealant

Moje Auto Radiator sealant is the latest generation agent for sealing leaks from cooling systems. Eliminates cracks up to 0,9 mm and leaks in hoses. [...]

Available capacities:

KTM

Advantages

Instantly seals all radiator leaks
Safe for all types of coolers

Offers (7) Product information

Select a store

Welcome to online shopping

To purchase the product, please go to the website of one of our distributors. Mark Moje Auto does not ship products.

From producer

Moje Auto Radiator sealant is the latest generation agent for sealing leaks from cooling systems. Eliminates cracks up to 0,9 mm and leaks in hoses. The preparation is safe for all types of metal and aluminum radiators and heaters, and does not clog radiator channels and other system elements.

How to use

You will need:

Moje Auto Radiator sealant,
Protective gloves.

1 step

Start the engine

Moje Auto Radiator sealant should be used on warm liquid. Therefore, before using it, start the engine and wait until the liquid warms up. Just leave the engine running at idle for a few minutes.

2 step

Put on protective gloves

Preparation Moje Auto Radiator sealant irritates the skin. Therefore, be careful and wear protective gloves before using the product. Also protect your clothing and perform activities with due care.

3 step

Shake the container

Before use Moje Auto Radiator sealant should be mixed thoroughly. To do this, shake the bottle well to mix the preparation properly. The product prepared in this way is now ready for use.

4 step

Pour sealant into the radiator

Pour the finished sealant into the radiator, making sure to keep the engine running. Leave it like this for a few more minutes to allow the sealing material to mix freely with the coolant. The product will harden and effectively seal any leaks. Moje Auto Radiator sealant sufficient for cooling systems with a capacity of up to 20 liters.

5 step

Wash your hands

If you did not use protective gloves, wash your hands immediately after performing all activities.

Moje Auto Radiator sealant is a latest generation product that effectively and immediately seals leaks from the cooling system. It can be successfully used for all types of metal and aluminum radiators. Instantly eliminates cracks up to 0,9 mm, while maintaining safety for cooling system components. It works quickly and does not require disassembly of the system. It is a product intended for immediate removal of leaks that may lead to engine overheating.

Worth reading: How to take care of the radiator in your car – how to add coolant to the radiator yourself?

Tips

1 tip

Radiator fluid losing quickly? Check for leaks!

If you notice faster loss of coolant only in the summer, the problem should not be a concern. Unless there are visible leaks, then you need to act immediately! These types of fluids must not be deficient because they may cause the engine to overheat and damage it. So apply Moje Auto Radiator sealant, which will immediately remove the fault. Importantly, it does not impede the circulation of fluid in the cooling system, which makes it completely safe to use.

2 tip

Should I replace or top up the coolant in the radiator?

The coolant in the radiator is responsible for the proper dissipation of heat and protects the engine from overheating. However, over time it loses its properties, which means it no longer provides optimal operation. Refilling the coolant is of course necessary, but it is worth replacing it with a new one every two years.

3 tip

What to do if a hose bursts?

There are plenty of hoses under the hood that bring fluids in and out. Minor leaks can be repaired using special sealants. But what if the hose bursts? Then it's worth having on hand Moje Auto Repair bandage, which will quickly seal the crack. Due to its excellent resistance to high temperatures, water and oils, it provides immediate help.

related products

Radiator sealants

Moje Auto Powder for sealing radiators

Repair preparations