My car always well kept!

Moje Auto Virage/Car Lum Halogen car bulbs

Moje Auto Virage/Car Lum Halogen car bulbs

Review

5

Choose Type


KTM

Advantages

  • Greater range, greater brightness, longer duration
  • 30% greater lighting range.
  • 20% greater brightness.
  • 20% more lighting time.

From producer


Moje Auto Virage/Car Lum Halogen car bulbs intended for cars, motorcycles and other road vehicles. Available in various variants – H1, H3, H4, H7. Thanks to this, they are used in car high beam, fog and low beam lights. Moje Auto Virage/Car Lum Halogen car bulbs have European approval. Compared to competing bulbs with the same parameters, bulbs Moje Auto Virage Car Lum provides:

  • 30% greater lighting range,
  • 20% brighter light
  • and 20% longer service life.

The product is electronically tested, which guarantees the efficiency and quality of the bulbs.

How to use


You will need:

  • Moje Auto Virage/Car Lum Halogen car bulbs,
  • Screwdriver,
  • Gloves,
  • Kitchen paper or tissues.

1 step

Prepare for replacement

Before you start changing the bulb, you need to have everything on hand. First, read your car's owner's manual. Here you will learn how to get to the bulbs and what tools you will need. Most often, screwdrivers are necessary. A cross to unscrew any screws securing the reflector and a flat cross to pry out e.g. the masking strip. In addition, also prepare new light bulbs, disposable gloves and tissues or a piece of other paper.

2 step

Get to the light bulb

Depending on the car or engine model, replacing the bulb may require dismantling some elements. Always follow your vehicle's instructions to safely access the bulb.

3 step

Remove the socket

Once you get to the bulb socket, simply twist it and remove it. These sockets are special plugs that, when gently turned to the left, will release the lock. After that, gently slide them out of the hole.

4 step

Replace the bulb

Now it's time to remove the old bulb from the socket. Grab it by the bayonet and, gently moving it sideways, slide it out of the plug.

5 step

Install a new bulb

Insert the new bulb in place of the old one, remembering not to grab it with bare hands. When removing the bulb from its packaging, hold it by the bayonet or through a tissue. Then insert it into the socket and you're done. Now just install the socket in the headlight and put all the elements back together.

IMPORTANT! Be careful when replacing a bulb. Never handle a new bulb with your bare hand as you may damage it. Always use protective gloves or hold it through paper. Also remember to adjust the lights correctly after installing the new bulbs so that they do not blind other drivers.

AAdditional Information


Moje Auto Virage/Car Lum Halogen car bulbs it is a high quality product. Thanks to the tests carried out, you can be sure that you are choosing proven and 100% functional bulbs. When installing, remember that the bulb must fit perfectly into the socket. Otherwise, the light beam may be directed incorrectly, which translates into insufficient illumination of the road. Always choose approved bulbs, i.e. the ones offered Moje Auto. The quality of light and the durability of the bulb determine the quality and efficiency of the electrical installation. Replacing a bulb is a good time to check it and make any repairs.

Worth reading: Replacing a light bulb in a car – how to do it yourself? What do you need to know about replacing a light bulb in a car?

 

Tips


1 tip

Are you planning to replace the bulbs in your vehicle? This is what you need to know!

When replacing halogen car bulbs, pay attention to several important aspects. First of all, for your own safety, but also for the electrical installation. Do not touch the new bulb with your hand. Even the slightest dirt left on its surface in the event of contact with high temperatures may cause the glass to become dull and shorten the life of the bulb. So hold it by the bayonet or with a clean handkerchief. Moje Auto Virage/Car Lum Halogen car bulbs If replaced correctly, they will serve their function for a long time.

2 tip

How to deal with a cable fault?

Inspect your car regularly, because this is the only way to avoid breakdowns. If you encounter a damaged cable, take immediate steps to repair the problem. How to deal with it? Turns out you can fix it in just a few moments! Enough for this Moje Auto Repair bandage, which you can use to wrap a broken wire. This is an exceptionally fast-acting product that ensures full tightness and resistance to high temperatures, water and oils.

3 tip

Strip peeling off? See how to deal with it!

During the operation of the car, many different incidents may occur, which may result in damage to something. If, for example, a strip in your car keeps peeling off, use proven solutions. Use a tool that can work not only for such faults. This Moje Auto VIRAGE – Double-sided tape 12 mm x 2 m, which, thanks to its exceptional strength, will glue almost anything. It is resistant, so it can be used both indoors and outdoors.

related products


Opinions


Robert1

Very good quality bulb, works as the manufacturer says on the packaging, good quality light is no different from more expensive competitor bulbs. Mine have been on for about two years and are still going strong. I recommend it to everyone because it's worth it.

Write a review

Your rating

Quick contact


Newsletter

Information about new products, advice, initiatives. Stay updated!

Sign up

Contact form

Do you have any questions? We have the answers!

Write to us

Note:

Web browser, which you are using is obsolete, making the page it will not display correctly.

Required to change the browser to e.g. Chrome, Firefox, Opera